the beta8 that can use hdc

Home Page Forums Network Management ZeroShell the beta8 that can use hdc

This topic contains 3 replies, has 0 voices, and was last updated by  yuda 11 years, 3 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #40854

    yuda
    Member

    Can you release another version in the beta8 that can use hdc (Second Master)
    Because many onboards CF slot use hdc (Second Master)
    Thank you very much

    #46072

    imported_fulvio
    Participant

    Could you post a list of these devices that need to boot from the secondary master?

    Bye
    Fulvio

    #46073

    dserfez
    Member

    Hello, I have an Advantech PCM-5820 SBC that I’d like to run Zeroshell on from a CF card whose socket is soldered on the board as secondary master (/dev/hdc). I’ve been trying Zeroshell out in VMWare and I like it really allot.
    E proprio una ‘distribuzione’ eccellente, congratulazioni!

    #46074

    ncat987
    Member

    download this file here but be sure of what your drive # is

    physdiskwrite.exe

    then make a .bat file called writenow.bat

    edit that file and put this inside it:

    cd C:zeroshell
    physdiskwrite -u ZeroShell-1.0.beta8-CompactFlash512.img

    after you save the file make a folder on the root named zeroshell, copy those files into that folder as well as the compact flash version of zeroshell in the unzipped state, and when ready run the writenow.bat file and follow the on screen prompts.

    this works for me everytime, if you have an existing zeroshell configuration, be sure to back it up before hand.

    #46075

    s1037989
    Member

    Here’s one where the CF is on Secondary Master (hdc).

    http://www.rackmountmart.com/html/raidTower.htm

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.