Temp files in RAMDISK X HD

Home Page Forums Network Management ZeroShell Temp files in RAMDISK X HD

This topic contains 2 replies, has 0 voices, and was last updated by  hoisel 11 years, 5 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #40774

    hoisel
    Member

    Hi people, I decided to use the Zeroshell as solution in my infrastructure of Internet. I installed the content of the image for Flash in a HD and configured it as router. I created the classes of QoS that I judged necessary. I needed more or less 150 classes and 300 rules in the classifiers. When I started to insert these data via interface web I verified that the system was slow. Then it stopped. After several errors, finally not allowing the access via web. I saw the root directory was full and it was mounted in RAM, with only 32 MB. I ask: How to configure the Zeroshell to not use RAMDISK, since it is installed in a HD?

    #45865

    hoisel
    Member

    This problem was mentioned previously in this post. Two releases later…

    #45866

    imported_fulvio
    Participant

    The issue was fixed in the current 1.0.beta7 release.

    Regards
    Fulvio

    #45867

    hoisel
    Member

    Thank you. I’ll test.

    Best regards.

    Daniel Hoisel

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.