Supported CPU’s and Quad-Nic’s ?

Home Page › Forums › Network Management › ZeroShell › Supported CPU’s and Quad-Nic’s ?

This topic contains 2 replies, has 0 voices, and was last updated by  Pit 9 years, 6 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 14, 2010 at 3:44 am #42134

    Pit
    Member

    Hi together,

    while reading this forum i have seen a post dealing with Via Epia boards and C3 processors.
    When it is planed to support this processors? They are great for fan less devices.
    Is there a list which processors are supported now? I don’t want to buy the wrong one.
    Is there support for quad-nic’s?

    Thanks in advance for your answers.

    Pit

    January 14, 2010 at 9:22 am #49366

    ppalias
    Member

    CPUs and NICs supported in 2.6.25.20 kernel are supported in Zeroshell 1.0beta12.

    January 14, 2010 at 2:58 pm #49367

    Pit
    Member

    Hello ppalias,

    thanks for your fast response. I will try the Epia and respond if it works.

    Pit

    February 5, 2010 at 5:41 pm #49368

    Pit
    Member

    Hello,

    Jetway J7F2WE1GES P 1000MHz Mini-ITX +
    Jetway Adapter 02 3xGiga Lan +
    NIC INTEL PRO/1000GT PWLA8391GT bulk +
    SP DOM 40Pin IDE 1024MB V Delock +
    DIMM 1024MB DDR2-RAM 667 KVR667D2N5 LP

    works fine out of the box.

    Thanks again for this wonderfull distribution.

    Pit

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.