Statistical network graphics

Home Page Forums Network Management ZeroShell Statistical network graphics

This topic contains 5 replies, has 0 voices, and was last updated by  imported_fulvio 10 years ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #41618

    imported_fulvio
    Participant

    Statistical graphics by MRTG for network traffic (Ethernet, Wi-Fi, VLAN, PPPoE, 3G and VPN), system load average, traffic shaping and gateway load balancing are now available by installing the update http://www.zeroshell.net/eng/patch-details/#C110

    Regards
    Fulvio

    #47984

    miloo
    Member

    http://www.zeroshell.net/eng/activation
    Does 1 contribution=1 activation or 1 contribution=many activations?

    What information does zeroshell.net collects out of this activation process?
    We can be too sure since there’s no source code for the rendering engine.

    #47985

    Plop
    Member

    @fulvio wrote:

    Statistical graphics by MRTG for network traffic (Ethernet, Wi-Fi, VLAN, PPPoE, 3G and VPN), system load average, traffic shaping and gateway load balancing are now available by installing the update http://www.zeroshell.net/eng/patch-details/#C110

    Regards
    Fulvio

    Hello Fulvio,

    First of all I really appreciate your work on this great project, I know how time consuming this can be!

    I have installed the patch without any problems, however, I don’t know from where to start after that. Can you give me a small hint 😳 please?

    #47986

    alpha_wall
    Member

    @plop wrote:

    I have installed the patch without any problems, however, I don’t know from where to start after that. Can you give me a small hint 😳 please?

    On the top part of your ZS pages on the right you have the white space wit the uptime statistics, … there is new link graphics.

    It will open the chart and show you the system usage. all other options require the activation key.

    good luck

    #47987

    Plop
    Member

    @alpha_wall wrote:

    @plop wrote:

    I have installed the patch without any problems, however, I don’t know from where to start after that. Can you give me a small hint 😳 please?

    On the top part of your ZS pages on the right you have the white space wit the uptime statistics, … there is new link graphics.

    It will open the chart and show you the system usage. all other options require the activation key.

    good luck

    Thank you Alpha,

    I didn’t noticed it 🙂

    #47988

    Plop
    Member

    @miloo wrote:

    http://www.zeroshell.net/eng/activation
    Does 1 contribution=1 activation or 1 contribution=many activations?

    What information does zeroshell.net collects out of this activation process?
    We can be too sure since there’s no source code for the rendering engine.

    Hello Fulvio,

    This is good question, can you please answer? I am ready to contribute and without these features, however, if you’re placing these features on this way it’s up to you – this is your project, but please name the price and make the activation process clear.

    I know that you are trying to earn some profit from your nice and time consuming project, anyway, this is not the best way(only my opinion of course)

    #47989

    imported_fulvio
    Participant

    Does 1 contribution=1 activation or 1 contribution=many activations?

    As you like.
    If you do not like contribute then send me the feature code and I will answer with the Key.

    What information does zeroshell.net collects out of this activation process?

    I do not understand this. When you send me the Feature Code (which contains only the MAC address) I manually answer with the Key. What information could I capture?

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.