SOLVED: Getting the USB img onto a USB drive?

Home Page › Forums › Network Management › ZeroShell › SOLVED: Getting the USB img onto a USB drive?

This topic contains 2 replies, has 0 voices, and was last updated by  arfon 3 years, 11 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 17, 2015 at 7:21 am #44405

    arfon
    Participant

    There was at one time, instructions on how to copy the USB inage onto a USB stick. I can’t find them now.

    I tried “dd if=ZeroShell-3.4.0-USB.img.gz of=/dev/sdc” and it said it copied 244Mb over but, I can’t get it to boot.

    Anyone have instructions?

    October 17, 2015 at 6:20 pm #53915

    igork
    Member

    I did the following:

    Downloaded ZeroShell-3.4.0-USB.img.gz file. I unzipped it using 7-zip utility. I received .img file.

    After that, I used https://rufus.akeo.ie utility to create bootable USB from that file.

    October 17, 2015 at 10:40 pm #53916

    arfon
    Participant

    Eh, I was hoping for a Linux solution but, your method worked like a charm… Any port in a storm- Thanks.

    October 20, 2015 at 1:33 pm #53917

    reaperz
    Member

    I have also used only windows solution, with physdiskwrite:

    http://www.zeroshell.net/listing/physdiskwrite.pdf

    Maybe you need to unzip before dd in linux?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.