Site-to-Site VNP Bonding decreases bandwidth Home Page › Forums › Network Management › VPN › Site-to-Site VNP Bonding decreases bandwidth This topic contains 1 reply, has 0 voices, and was last updated by itm4s14s 3 years, 11 months ago. Viewing 1 post (of 1 total) Author Posts March 17, 2015 at 12:55 pm #44247 itm4s14sMember We’re experiencing a bad performance in this scenario. Site A Connection 1: 3MB Connection 2: 4MB Site B Connection 1: 3MB Connection 2: 4MB VPN00 and VPN01 are defined in each site. VPN00 connects A-B using Connection1 in both sites VPN01 connects A-B using Connection2 in both sites BOND00 defined in site A and B is configured with VPN00 and VPN01 as netbalancing and failover. If a file is copied from A to B (or from B to A) the speed never exceeds 1MB/s. But, if VPN00 or VPN01 is disabled the bandwith increases to the limit of the connection (3 o 4 MB depending on eth VPN disabled) What could be happening? Author Posts Viewing 1 post (of 1 total) You must be logged in to reply to this topic.