Single User Mode or Change Boot

Home Page Forums Network Management ZeroShell Single User Mode or Change Boot

This topic contains 0 replies, has 0 voices, and was last updated by  TechProfessional 1 year, 6 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #44797

    Is there any way to change the profile that is booted to automatically? I just had the CPU on the server running Zeroshell (3.7.1) die on me. I moved the HDD to a new box and things start to boot and now the boot hangs when the starting DNS service. It seems to hang indefinitely (at least 15 minutes). Any way that I can get around this? Any way to see logs/output from the start of DNS so that I can tell if its just recovering? Any way to skip a particular service?

    Normally on a linux box I’d just get into SingleUser mode and then troubleshoot from there but at this point I can’t even due that without the password for root…

    #54453

    DrmCa
    Participant

    Hang on DNS start sounds familiar, search this forum – someone else had this issue.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.