Should the mrtg service be started?

Home Page Forums Network Management ZeroShell Should the mrtg service be started?

This topic contains 0 replies, has 0 voices, and was last updated by  alank2 10 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #41638

    alank2
    Member

    Hi,

    I received a couple keys from Fulvio today (thanks!) and I entered them ok. I rebooted the zeroshell and still don’t see any graphics for ETH00 or ETH01.

    I then checked the mrtg service and noticed this:

    root@zeroshell root> service mrtg status
    MRTG is not running
    root@zeroshell root> service mrtg start
    Starting MRTG …
    Daemonizing MRTG … [ OK ]
    root@zeroshell root> service mrtg status
    MRTG is not running
    root@zeroshell root>

    It won’t stay running. Is this normal? Any idea why I’m not getting graphics for the ETH00/ETH01 ?

    Thanks,

    Alan

    #48025

    alank2
    Member

    Hi,

    Seems to be a bug in the global bandwidth settings. If you set them to kbit/s instead of mbit/s and use a value over 1000, then the mrtg service will only run for 10 seconds and quit. I’ve sent some diagnostics to Fulvio and he says he thinks he has it figured out and will fix soon. In the meantime, just use mbit/s and set it with a decimal like 1.344 as a solution.

    Good luck,

    Alan

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.