setting up Wireless nic’s Home Page › Forums › Network Management › Networking › setting up Wireless nic’s This topic contains 3 replies, has 0 voices, and was last updated by Cygnus 12 years, 6 months ago. Viewing 5 posts - 1 through 5 (of 5 total) Author Posts January 25, 2007 at 12:47 pm #40543 CygnusMember Thanx Fulvio for zeroshell its really great. Right my questions is. Is there any other way to setup wireless nic’s on zeroshell other then using the WRAP. Regards Cygnus, January 25, 2007 at 5:21 pm #45099 imported_fulvioParticipant Yes, you can use wi-fi cards, but at moment, in the web interface you cannot configure them. You have to configure the wi-fi using iwconfig directly from the console. This is possible if your card has support in the vanilla linux kernel. Regards Fulvio January 26, 2007 at 6:13 pm #45100 CygnusMember Thanx for that fulvio. Went into the iwconfig and im not picking up my D-Link 802.11g card or my Belkin 802.11b card. Do you know of any supported cards which i can use?? Regards Cygnus, January 30, 2007 at 6:18 pm #45101 imported_fulvioParticipant What type of wi-fi card do you need (PCI, miniPCI, USB,PCMCIA)? January 31, 2007 at 10:06 am #45102 CygnusMember At the moment im using a PCI wi-fi card… Author Posts Viewing 5 posts - 1 through 5 (of 5 total) You must be logged in to reply to this topic.