Sata Raid doesnt work Home Page › Forums › Network Management › ZeroShell › Sata Raid doesnt work This topic contains 0 replies, has 0 voices, and was last updated by gordon 9 years, 6 months ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts December 7, 2009 at 8:47 pm #42086 gordonMember Hi all, Does anyone know how to install this to a sata raid. Got two HP ML360 servers that use Sata Raid drives. I can set the raid up in the hp utility but zeroshell – fdisk just seems them as two seperate drives and not one. It also doesnt see to want to run from these drives. Install to the HDD as per the pdf on this site, it starts to load and then gives up on probing device or something similar. Any ideas. Cheers all. December 8, 2009 at 4:03 am #49231 ppaliasMember If it doesn’t recognise the RAID it may be an issue of kernel. There are some posts in the forum describing how to add functionality. Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.