Samba very strongly loads the cpu

Home Page Forums Network Management ZeroShell Samba very strongly loads the cpu

This topic contains 1 reply, has 0 voices, and was last updated by  DrKalash 8 years, 9 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #42397

    DrKalash
    Member

    Greetings to all. A question here in what – after installation of a package a samba load on the processor has risen from usual 5-10 % to 80-95 % or still above
    After run “service samba stop” command load falls to 10 %
    Data системника:
    CPU (1) Intel(R) Celeron(R) CPU 2.26GHz 2261MHz
    Uptime 0 days, 1:47
    Load Avg 0.06 0.06 0.06 Graphics
    Kernel 2.6.25.20
    Memory 507368 kB
    There are any thoughts on this subject?
    In advance thanks also I apologise for English,
    I write through an online translator. 🙂

    #50312

    DrKalash
    Member

    Help to make makeshift please.
    The version ZeroShell is Release 1.0.beta12
    It is customised on reboot in 8:00.
    How to remove a samba from a StartUp?
    Removal “service samba start” from “post boot” does not help, the string again is after reboot.
    Creation of script Cron samba_stop with the command “service samba stop” does not help. Samba stops only through SSH.

    #50313

    ppalias
    Member

    How about creating a post boot script to “service samba stop”? If it needs to be run through SSH (which I don’t understand the reason why) you may try to create a script containing this command and run the script instead at the post boot.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.