rt_tables

Home Page Forums Network Management ZeroShell rt_tables

This topic contains 0 replies, has 0 voices, and was last updated by  bbozo 11 years, 4 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #41028

    bbozo
    Member

    Greta Job Fluvio…..

    two questions (for anyone who can help)

    1. I am trying to add two more routing tables, and iam able to add and save /etc/iproute2/rt_tabels but when i reboot it all goes back to default?!!
    Is there a way to make changes premanent?
    It’s possible that i am misssing somethig quite simple but i am stuck.

    2. Is it possible to make multi wan (2, and more ISP connections) load balancing by changing conf, and script files in zeroshell?

    Thanks in advace.

    #46468

    bbozo
    Member

    Update:

    about rt_tables still no go,

    but i did manage to make 2 ISP-s to “work”

    I have 1 PC with 3 NICs

    eth00 – ISP on adsl going trought adsl modem which is set as dhcp and gives 1 IP 192.168.10.5

    eth01 – ISP on cable modem dhcp ip directly from ISP

    eth02 – local network

    I made BOND with eth00 and eth01 (Fault tolerance and load balancing)

    problems:
    1. for some reason when ZS uses ISP on adsl some 50% of traffic is lost
    2. when I try to remove BOND ZS stops responding and i takes 2 or more times to reset it to get it back on and to remove BOND

    Any Ideas………

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.