Routing Table

Home Page Forums Network Management ZeroShell Routing Table

This topic contains 2 replies, has 0 voices, and was last updated by  777maxism 8 years, 7 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #42477

    777maxism
    Member

    The problem with the routing table, after rebooting zs rules in the table does not work … For example route Destination 10.55.0.0 Netmask 255.255.255.0 Type Net Metric 1 Gateway 192.168.0.1 State Up stops working. On the server, manually change the metric on 2, all starts to work until the next reboot. How do I fix this? Tested on versions ZS_11 and ZS_12.

    #50626

    ppalias
    Member

    Is your profile activated correctly?
    Are other changes saved after a reboot?
    Is the interface that is directly connected to 192.168.0.1 up when the system boots?

    #50627

    777maxism
    Member

    1. Profile activated correctly.
    2. Other changes saved after a reboot.
    3. Interface to which it belongs IP 192.168.0.1 up …

    #50628

    ppalias
    Member

    1) Check logs for anything unusual.
    2) Post here a copy-paste of the

    route -n

    command on shell before you do anything after a reboot and one more time after you have changed the metric. Also post the screenshot of the static route on the web interface.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.