Routing Table Help [SOLVED]

Home Page Forums Network Management Bridges and Routers Routing Table Help [SOLVED]

This topic contains 0 replies, has 0 voices, and was last updated by  pntz 1 year, 6 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #44780

    pntz
    Member

    I’m struggling with a routing issue.

    Home ZS:
    Destination Netmask Type Metric Gateway Interface Flags State Source
    DEFAULT GATEWAY (LB) 0.0.0.0 Net W.99 10.11.2.2 BOND00 UG Up Auto
    DEFAULT GATEWAY (LB) 0.0.0.0 Net W.1 ppp0 UG Up Auto
    DEFAULT GATEWAY (LB) 0.0.0.0 Net W.1 ppp1 UG Up Auto
    DEFAULT GATEWAY (LB) 0.0.0.0 Net W.1 ppp2 UG Up Auto
    10.10.0.0 255.255.0.0 Net 0 none ETH01 U Up Auto
    10.11.1.0 255.255.255.252 Net 0 10.11.2.2 BOND00 UG Up Static
    10.11.2.0 255.255.255.252 Net 0 none BOND00 U Up Auto
    xx.xx.xx.xx 255.255.255.255 Host 0 none ppp1 UH Up Auto
    xx.xx.xx.xx 255.255.255.255 Host 0 none ppp0 UH Up Auto
    xx.xx.xx.xx 255.255.255.255 Host 0 none ppp2 UH Up Auto

    VPS ZS:
    DEFAULT GATEWAY 0.0.0.0 Net 0 10.11.1.1 ETH01 UG Up Static
    10.10.0.0 255.255.0.0 Net 0 10.11.2.1 BOND00 UG Up Static
    10.11.1.0 255.255.255.252 Net 0 none ETH01 U Up Auto
    10.11.2.0 255.255.255.252 Net 0 none BOND00 U Up Auto
    xx.xx.xx.xx 255.255.254.0 Net 0 none ETH00 U Up Auto

    All devices on my home network can reach 10.11.1.1 to connect to the internet. They do so by routing through my Home ZS as shown in the image. However, my Home ZS isn’t able to reach 10.11.1.1 (confirmed by Utilities Ping), and so isn’t able itself to connect to the internet (e.g. Packages page can’t reach zeroshell.net, nor do Google DNS requests return anything). What am I missing?

    Thank you

    Solution:

    I was lacking a static route to 10.11.2.0/30 subnet on the UTM (10.11.1.1). Adding one w/ a gateway of 10.11.1.2 fixed the issue.

    #54426

    mariad
    Member

    Glad you worked it out, would now be quite helpful for other users as well.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.