Route

This topic contains 1 reply, has 0 voices, and was last updated by  chrmueller 7 years, 7 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #42060

    chrmueller
    Member

    Hello, i am from germany. At first sorry for my englisch
    I Have found some Bug under Release 1.0.beta12

    I have add a route under “ROUTER” an sometimes the router forget this route, then I must Change this Route an save the same settings and all works good. And after a restart , the routes are not active

    #49154

    ppalias
    Member

    Could you show us the network interfaces of your router as well as the routes you are adding?

    #49155

    divide
    Member

    @chrmueller wrote:

    Hello, i am from germany. At first sorry for my englisch
    I Have found some Bug under Release 1.0.beta12

    I have add a route under “ROUTER” an sometimes the router forget this route, then I must Change this Route an save the same settings and all works good. And after a restart , the routes are not active

    I have the latest release beta15 and I have to agree with this bug. In my scenario seconday route will disappear when my cable modem disconnect randomly and eth1 goes down.

    Here is my routing table:

    Destination Gateway Genmask Flags Metric Ref Use Iface
    82.22.50.234 72.221.232.1 255.255.255.255 UGH 0 0 0 ETH01
    192.168.1.0 * 255.255.255.0 U 0 0 0 BRIDGE00
    192.168.10.0 192.168.1.10 255.255.255.0 UG 0 0 0 BRIDGE00
    77.221.232.0 * 255.255.248.0 U 0 0 0 ETH01
    82.22.0.0 192.168.1.6 255.255.0.0 UG 10 0 0 BRIDGE00
    default 77.221.232.1 0.0.0.0 UG 0 0 0 ETH01

    The route
    82.22.50.234 72.221.232.1 255.255.255.255 UGH 0 0 0 ETH01
    disappears when eth1 goes down and route wont come up after eth1 is up.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.