rndis gateway

Home Page Forums Network Management Networking rndis gateway

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #66009
    Francesco Viganego
    Participant

    I’m trying to use a cell phone as a secondary gateway on my virtualbox router, using usb link.
    Link seems working when connected … I get

    *************
    [Tue Jun 2 09:21:28 2020] usb 2-3: Manufacturer: MediaTek
    [Tue Jun 2 09:21:28 2020] usb 2-3: SerialNumber: T592D1ZH81101268
    [Tue Jun 2 09:21:29 2020] usb 2-3: USB disconnect, device number 6
    [Tue Jun 2 09:21:29 2020] usb 2-3: new high-speed USB device number 7 using ehci-pci
    [Tue Jun 2 09:21:29 2020] usb 2-3: New USB device found, idVendor=0e8d, idProduct=2004
    [Tue Jun 2 09:21:29 2020] usb 2-3: New USB device strings: Mfr=3, Product=4, SerialNumber=5
    [Tue Jun 2 09:21:29 2020] usb 2-3: Product: Wieppo S6 Lite
    [Tue Jun 2 09:21:29 2020] usb 2-3: Manufacturer: MediaTek
    [Tue Jun 2 09:21:29 2020] usb 2-3: SerialNumber: T592D1ZH81101268
    [Tue Jun 2 09:21:29 2020] rndis_host 2-3:1.0 usb0: register ‘rndis_host’ at usb-0000:00:02.1-3, RNDIS device, da:9c:34:84:d9:24
    *****************

    … and I can assign an IP address ….

    *********************
    usb0 Link encap:Ethernet HWaddr DA:9C:34:84:D9:24
    inet addr:192.168.5.50 Bcast:192.168.5.255 Mask:255.255.255.0
    inet6 addr: fe80::d89c:34ff:fe84:d924/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:12 errors:0 dropped:0 overruns:0 frame:0
    TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:1000 (1000.0 b) TX bytes:4501 (4.3 Kb)
    **********************

    still the new interface is not visible via webadmin and a can’t use it for a load balancing

    Any ideas?

    Thanks in advance…

    Francesco

    #66114
    router portal
    Participant

    192.168 8.1 Login to the router from your phone
    This article is useful for those who want to access router settings. Most routers log on to 192.168.1.1, so this guide is universal and very popular. First, we need to specify the settings, what router and what parameters we want to change. Open the center.
    You can do everything on routers of reliable companies like TP-Link, ASUS, ZyXEL, D-Link, Netis, Tenda, Topolino. However, you can always find the factory address. For example, check the connection properties of the device or computer. We’ll get back to that.
    If you don’t understand the content of the article, the purpose of the title, and what to do, I’ll try to explain. If you are dealing with this topic, you will not be able to read what you wrote under the spoiler.

    On Huawei, it is usually 192.168.100.1. This article shows you exactly how to open the settings page for your router or modem. Even if you don’t know your address. After all, this is subject to change and does not match the factory. Device.192.168 8.1 Log in to the router from your phone
    This article is useful for those who want to access router settings. Most routers log on to 192.168.1.1, so this guide is universal and very popular. First we need to specify the settings, what type of router and what parameters we want to change. Open the center.
    You can do everything on routers from reliable companies like TP-Link, ASUS, ZyXEL, D-Link, Netis, Tenda, Topolink. However, you can always find the factory address. For example, check the connection properties of the device or computer. We’ll get back to that.
    If you don’t understand the content of the article, the purpose of the title, and what to do, I’ll try to explain. If you are dealing with this topic, you will not be able to read what you wrote under the spoiler.

    On Huawei, it is usually 192.168.100.1. This article shows you exactly how to open the settings page for your router or modem. Even if you don’t know your address. After all, it can be changed and does not match the factory. Device.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.