Regarding Zeroshell and WDS

Home Page Forums Network Management ZeroShell Regarding Zeroshell and WDS

This topic contains 0 replies, has 0 voices, and was last updated by  skumaran 9 years, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #41780

    skumaran
    Member

    Dear All,

    I am trying to create a WDS using my Soekris net 5501 board for the past 3 weeks, but I am still unsuccessful. I have already posted two times in the Zeroshell forum regarding my problem, but I did not get any answers to my post. It would be really helpful if you can help me out with this problem.

    This is the configuration I am looking for. I would like to connect to the
    Internet via laptop

    Internet—ethernet wire—Board 1—-wireless—Board 2–wireless–laptop.

    Here both Board 1 and Board 2 should act as an Access point. Since I am
    pretty new to this field I am finding it difficult to understand all the
    things that Zeroshell provides.

    So, it would be very helpful if you can help me out with this. Eagerly
    awaiting your reply.

    Please some one help me out with this issue.

    Thanks.

    #48402

    skumaran
    Member

    Hello Everyone,

    Can some one please help me out with this issue.

    If some one had ever worked with WDS in Zeroshell or WDS in any other Linux Distro please help me out to solve this. I have tried almost everything that is available on the internet, but nothing has worked. I would really appreciate your help.

    Thanks.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.