Redirect http to https

Home Page Forums Network Management Signal a BUG Redirect http to https

This topic contains 5 replies, has 0 voices, and was last updated by  vargasandor 2 years, 7 months ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #43214

    vargasandor
    Member

    Hello, All!

    I am not sure this is a bug, but it is a problem for me.
    We use Zeroshell as a router between internet and a few servers which are serving several portals.

    At most of the times it works very well, but from time to time Zeroshell redirects all http requests to https. On the same ip, we use http to access the webserver (Apache2) on a server behind the Zeroshell, and https to access the web surface of zeroshell.
    So when this redirection starts, the portals are not accesible, but the ZeroShell web-login. Restarting ZeroShell from it’s web interface solves the problem for a time, when it appears again.

    If somebody faced this problem, or is You have an ideea how to solve this problem, please help.

    Thank You,
    Sanyi.

    #52092

    redfive
    Participant

    Maybe changing the ZS’s http port to other than 80 could solve this issue ? e.g. 8082 ? From System>>Setup>>https , but I haven’t tried …
    cheers
    jonatha

    #52093

    vargasandor
    Member

    I don’t want to change the default port, becouse there are public webpages behind ZeroShell, and I would have to force everibody to call the pages with the changed port.

    #52094

    redfive
    Participant

    I meant to change the ZS http port , not http ports of your pubblic servers behind Zs , but , as I said , I haven’t tried… could work
    cheers
    jonatha

    #52095

    vargasandor
    Member

    Changing that port could create problems accessing the WEB-interface? We access it remotely and loosing contact, we will have to travel to the server.
    Thank You.

    #52096

    redfive
    Participant

    I’ve just tryed on my sistem to change the ZS’s http port from 80 to 8086 , and seems ok .
    typing yourip:8086 you will be redirected to the ZS https page . When you attempt to change the ZS’s http default port (80) the system will show you an error , like

     Dec 15 13:07,00 ERROR: http/https access not changed: the TCP port 443 is already used by another service

    but seems a bug ( the error shown) , because with the new http port (8086) ZS works as expected .Remember that I’ haven’t any web server behind my ZS , so .. may be this evening I can try , but if you are “on site ” a little test is very fast…

    We access it remotely and loosing contact

    This after having changed the port , before or randomly ?
    cheers
    jonatha

    #52097

    pgbuz
    Participant

    have the same problem. cannot change the web https and http port for zeroshell management

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.