Read-only file system, but hdd not full

Home Page Forums Network Management Signal a BUG Read-only file system, but hdd not full

This topic contains 0 replies, has 0 voices, and was last updated by  jvn 3 years, 1 month ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #44479

    jvn
    Member

    Dear Fluvio,

    I have a very strange behavior.
    My system is a Zeroshell 3.4.0

    The logs stopped on 8 january 2016 and some service are stopped (like DHCP)

    in the console, i can see a lot of messages :

    mkdir: cannot create directory ‘/Database/LOG/2016/Jan/11’ : Read-only file system

    I can login the system through SSH:

    root@zeroshell ~> df -h
    Filesystem Size Used Avail Use% Mounted on
    tmpfs 1.5G 14M 1.5G 1% /
    /dev/sr0 267M 267M 0 100% /cdrom
    shm 1.5G 0 1.5G 0% /dev/shm
    /dev/sda4 7.0G 4.0G 2.7G 60% /DB
    /DB/_DB.003 7.0G 4.0G 2.7G 60% /Database
    none 512M 0 512M 0% /Database/var/register/system/havp/tmp

    root@zeroshell ~> free
    total used free shared buffers cached
    Mem: 3111632 496864 2614768 0 148100 203428
    -/+ buffers/cache: 145336 2966296
    Swap: 131068 0 131068

    why my system is in Readonly ?
    Can i do something else than reboot ?

    Best regatds,
    Jean

    #53997

    michael
    Member

    Try “df -i” may be you are out of inodes and you need to clear some log data.

    Regards,
    Michael

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.