radiusd fails after few hours Home Page › Forums › Network Management › ZeroShell › radiusd fails after few hours This topic contains 4 replies, has 0 voices, and was last updated by floaty 12 years, 3 months ago. Viewing 6 posts - 1 through 6 (of 6 total) Author Posts December 18, 2006 at 3:28 pm #40522 floatyMember radiusd fails when receiving duplicated rad-requests from cisco-wlc-4404. is there an possibility to monitor and restart the radiusd, when this problem occurs? #################### rml-detail: couldn´t open file /var/log/radius/reply: too many open files December 18, 2006 at 6:45 pm #45053 imported_fulvioParticipant I will try to fix the problem in the next release. In any case you should put the following line in the file /etc/rc.local echo 4194304 > /proc/sys/fs/file-max and then reboot the box. This could be a temporary solution. Regards Fulvio December 18, 2006 at 11:32 pm #45054 floatyMember thank you, i will post the results for this workaround asap January 8, 2007 at 9:12 am #45055 floatyMember filehandles increased … looks better now. (the duplicated rad-requests from wlc440x seems to be normal behaviour … if wpa and wpa2 with AES and TKIP are enabled the controller sends 4 requests with only wpa2 and AES only it is 1 request) January 15, 2007 at 9:14 pm #45056 floatyMember … is now running 4 days till it crashs … i have tested with NTRADPing on my test-server (without 802.1x) … the open files are not increased per rad-auth-(acct)-request [ root@foorad fs> cat file-nr 384 0 12083 root@foorad fs> cat file-nr 384 0 12083 root@foorad fs> cat file-nr 384 0 12083 root@foorad fs> ] no idea … maybe an openssl-problem ? a cron-job or timed-reboot-script would be nice as a workaround, but my scripting skills are very “misunderestimated” 🙂 January 17, 2007 at 6:34 pm #45057 imported_fulvioParticipant Try to type the following comand from the console shell: echo “( sleep 86400 ; reboot ) &” >> /etc/rc.local and the reboot the system. It will automatically reboot Zeroshell everyday. Regards Fulvio Author Posts Viewing 6 posts - 1 through 6 (of 6 total) You must be logged in to reply to this topic.