Radius PEAP over VPN link

Home Page › Forums › Network Management › Networking › Radius PEAP over VPN link

This topic contains 2 replies, has 0 voices, and was last updated by  fadjar340 10 years ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 29, 2009 at 4:54 pm #41435

    fadjar340
    Member

    Hi,

    I just wondering if I want to use LAN to LAN VPN link used for PEAP Authentication.

    The configuration like below:

    Client —> AP (Radius client) —> LAN to LAN VPN —> Radius Server (PEAP)

    I assumed that LAN to LAN VPS already use encryption channel then the PEAP authentication for client also use encryption.
    Is it possible with this configuration?

    Regards,
    Fadjar T

    January 29, 2009 at 6:20 pm #47531

    imported_fulvio
    Participant

    Yes, it possible and easy to configure. In any case, PEAP is already strongly encrypted.

    Regards
    Fulvio

    January 29, 2009 at 6:32 pm #47532

    fadjar340
    Member

    Hi Fulvio,

    So it’s mean the PEAP encryption stream can passing through LAN to LAN VPN.

    I just still confusing concerning this configuration because encrypted via encrypted link.

    This configuration was asked by my client.

    Thanks…

    Regards,
    Fadjar T

    January 29, 2009 at 6:37 pm #47533

    imported_fulvio
    Participant

    Do not worry, it works. Do not forget, that an OpenVPN VPN with TAP virtual devices acts as a virtual Ethernet connection. Hence, any layer 2 traffic (and not only IP protocols) can cross the VPN.

    Regards
    Fulvio

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.