Radius: Add access point error Home Page › Forums › Network Management › ZeroShell › Radius: Add access point error This topic contains 1 reply, has 0 voices, and was last updated by gazmac52 8 years, 11 months ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts February 26, 2010 at 12:13 am #42250 gazmac52Member Can someone help? I cannot add an access point to Radius. Everytime I try to add my WRTg4G IP with password etc. I get this error ‘ERROR: sh: line 1: s: command not found ‘ I have tried many different settings but cannot get it working. March 3, 2010 at 4:28 pm #49792 vpn_rollercoasterMember More description needed. March 3, 2010 at 11:12 pm #49793 gazmac52Member I have a wireless access point on 192.168.0.48 that can use the zeroshell radius server. I add the point as shown: When I try to add it I get this: In desparation I added the point to the zeroshell radius script manually. I know this is not the preferred way but I have not had success using the GUI. Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.