QoS not working Home Page › Forums › Network Management › Firewall, Traffic Shaping and Net Balancer › QoS not working This topic contains 1 reply, has 2 voices, and was last updated by Yegon Gideon 7 hours, 27 minutes ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts November 20, 2015 at 6:53 pm #44442 richmlpdxMember I have following the documentation for setting up QoS and tried to divide the traffic in to TCP and UDP to try and get anything out of the default QoS class. No matter what I do, all traffic is classified as DEFAULT. http://screencast.com/t/tuROT3IRbYrI http://screencast.com/t/bHGuakvqrOH http://screencast.com/t/TPOh6sJ5xYX http://screencast.com/t/Sf1vMWshC10 In addition, the firewall is not able to see any connections on ETH5 or ETH6, even though the bridge is passing traffic. April 24, 2019 at 11:05 am #65089 Yegon GideonParticipant I have been researching too about QoS, i recent installed zeroshell 3.8.2, any leads will be appreciated Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.