QOS global bandwidth

Home Page Forums Network Management ZeroShell QOS global bandwidth

This topic contains 0 replies, has 0 voices, and was last updated by  JCL 10 years, 7 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #41187

    JCL
    Member

    I created a transparent bridge with QOS following Fulvio Ricciardi’s example.
    I got a 20/1 Mbit internet connection, and my question is which values i should configure the global bandwidth with in both ETH00 and ETH01, and how much bandwidth should i assign to the P2P class without getting aggressive P2P clients?

    Thanks in advice.

    JCL

    #46920

    imported_fulvio
    Participant

    I suppose that ETH00 is the interface connected to the WAN router and ETH01 to the LAN switch. If so you should assign the following global values:

    ETH00 Maximum bandwidth: 1Mbit/s
    ETH00 Guaranteed bandwidth: 1Mbit/s

    ETH01 Maximum bandwidth: 20Mbit/s
    ETH01 Guaranteed bandwidth: 20Mbit/s

    and how much bandwidth should i assign to the P2P class without getting aggressive P2P clients?

    You should limit the outgoing P2P (ETH00) with 200Kbit/s

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.