QoS & Firewall Entries

Home Page Forums Network Management Networking QoS & Firewall Entries

This topic contains 3 replies, has 0 voices, and was last updated by  kami 11 years, 9 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #40596

    kami
    Member

    Hi,

    How many entries for (firewall & QoS) it can support. Is there any limitation?

    Thanks in advance.

    #45276

    imported_fulvio
    Participant

    I have not tested this stress condition, but I think it depends on the performances of your hardware.

    #45277

    kami
    Member

    hi again!

    here is my server info:-

    Server Dell Power Edge(1300)
    CPU 800*2 MHz
    HD 10GB
    RAM 512MB
    Mode Bridge

    I ve checked both QoS & firewall rules and it does not support more than 60 rules. Basically i want to implement Squid(delay_pool class 2) like policies by using QoS.
    I ve more than 100 hosts, here is my setup info

    Total Bandwidth 2MB
    192.168.10.11-192.168.10.50 (1MB) 64kbps/host
    192.168.10.51-192.168.10.100 (768kbps) 48kbps/host
    192.168.10.101-192.168.10.125 (256kbps) 32kbps/host

    any idea!

    Thanks

    #45278

    imported_fulvio
    Participant

    Hi,

    you could specify an IP range with the IP1-IP2 syntax in the QoS classifier. But in this case you will only shape the maximum bandwidth for a group of users and not for a single user.

    What type of error message do you get when you reach the limit of 60 rules?

    #45279

    kami
    Member

    hi again!

    I ve already controled the upload traffic by using IP range(for group), but controlling downloading is a big problem for me.

    So when i decided to control the download traffic for single user and reached to 60th rule , nothing happened just sequence no is displayed there( in classifier). While setting download limit for next host, squence no does not change.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.