QOS feature missing Home Page › Forums › Network Management › ZeroShell › QOS feature missing This topic contains 3 replies, has 0 voices, and was last updated by funnykishi 6 years, 11 months ago. Viewing 5 posts - 1 through 5 (of 5 total) Author Posts December 26, 2012 at 2:48 pm #43533 funnykishiMember I have installed Zeroshell RC 2 on IDE hard disk and create a QOS bridge. Bridge working fine but when creating rule for qos found peer to peer feature missing Here I am attaching the Picture. kindly someone help me to solve this problem. Thanks a lot [/img] December 30, 2012 at 4:08 pm #52586 funnykishiMember fulvio please help in this matter January 12, 2013 at 3:50 pm #52587 funnykishiMember I have found the solution. Thanks anyway,……. January 14, 2013 at 5:51 pm #52588 AtroposXMember What was the solution? I’ve asked about this before, and never got an answer. January 16, 2013 at 3:19 pm #52589 funnykishiMember I have used L7 protocols and make classifier by them they work and control any p2p traffic can you tell me how I can make a rule for bulk data transfer by a user who is downloading through web browser (port 80 and above). Author Posts Viewing 5 posts - 1 through 5 (of 5 total) You must be logged in to reply to this topic.