QOS and timerules

Home Page Forums Network Management ZeroShell QOS and timerules

This topic contains 0 replies, has 0 voices, and was last updated by  joo 10 years, 7 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #41279

    joo
    Member

    Hi guys,

    I have a big problem with the QOS and time rules. I created 2 rules for P2P. P2P should be in the queue P2P_night between 7 am and 12 pm and from 12pm till 7 am in the queue P2P_day. So my problem is, that there is still p2p traffic in the P2P_night queue after 7am. What should I do to fix this problem?

    Here the rules:
    P2P_day:
    MARK all opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 TIME from 07:00:00 to 00:00:00 ipp2p v0.8.2-pomng –kazaa –gnu –edk –dc –bit MARK set 0xe

    P2P_night:
    MARK all opt — in * out * 0.0.0.0/0 -> 0.0.0.0/0 TIME from 00:00:00 to 07:00:00 ipp2p v0.8.2-pomng –kazaa –gnu –edk –dc –bit MARK set 0x15

    cheers joo

    #47122

    joo
    Member

    so problem is solved – it’s a ugly hack, but it’s working:
    a cronjob runs 2 times a day, which sets the parameters for my queue.

    But on the other hand, Zeroshell has a problem with open connections and QOS!

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.