Proxy + Netbalancer Home Page › Forums › Network Management › ZeroShell › Proxy + Netbalancer This topic contains 1 reply, has 0 voices, and was last updated by hminkoong 9 years, 2 months ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts December 7, 2009 at 2:02 pm #42085 hminkoongMember My Scenario 1. I would like to enable proxy on Vlan1 (Guest) and Vlan 2 (staff) 2. I would like netbalancer to manage packets from Vlan1 to use internet ISP1 and packets Vlan 2 to use internet ISP2. My Problem: 1. Netbalancer can’t manage the traffic if proxy is used i.e. both vlan1 and vlan 2 use internet from the same ISP. My Question: Does anyone know how to configure Netbalacer to be able to manage the traffic if proxy is used ? December 7, 2009 at 5:56 pm #49229 ppaliasMember Netbalancer manages traffic according to source IP. If proxy is engaged then the source IP will always be the one of the proxy. Unless you divide the roles of proxy and load balancing to 2 different boxes I can’t think of another way to do it. December 9, 2009 at 8:39 am #49230 hminkoongMember Thank you for your advice Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.