Problem with LAN to LAN VPN setup Home Page › Forums › Network Management › VPN › Problem with LAN to LAN VPN setup This topic contains 1 reply, has 0 voices, and was last updated by Over_score 5 years, 6 months ago. Viewing 1 post (of 1 total) Author Posts November 29, 2013 at 9:54 am #43796 Over_scoreMember Hello, I’m trying to setup a VPN between 2 sites following this post: https://www.zeroshell.org/forum/viewtopic.php?p=2721#2721 I have only one subnet on both sites. When it comes to add the static route (on both Zeroshell) it wont work and I get following message: Nov 29 10:45,55 ERROR: Static route 192.168.6.0/255.255.255.0 via 192.168.50.6 metric 0 not added: RTNETLINK answers: No such process I’m using Release 2.0.RC3 on CDROM. The status of the VPN is up and green on both ZS. I tried adding the IP of VPN00 in the configuration form (configure button) and adding it below (Add IP button) Please, what am I doing wrong? Author Posts Viewing 1 post (of 1 total) You must be logged in to reply to this topic.