problem with ip’s

Home Page › Forums › Network Management › Networking › problem with ip’s

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 21, 2009 at 10:52 pm #41874
    hax0rserv
    Member

    I have problem when i add ips to ethernet devices, have 3 ethernet and 2 adsl connections with public ips 92.***.***.188 and 92.***.***.186 , i can add one ip on eth1 but when i try to add second ip i have message

    ERROR: IP 92.***.***.188/255.255.254.0 not added to ETH02 : 92.***.***.0/23 overlaps 92.***.***.0/23 (ETH01)

    regards to all

    August 22, 2009 at 5:43 am #48671
    ppalias
    Member

    Yeap this is a well known issue. You cannot have IPs in the same subnet for 2 different interfaces. I has been discussed here again and the workaround was to ask your ISP to provide you the second IP from a different subnet.

    August 22, 2009 at 5:41 pm #48672
    hax0rserv
    Member

    Is there any other way ?

    August 22, 2009 at 8:42 pm #48673
    ppalias
    Member

    You could try to bridge the 2 interfaces and assign the IPs on the BRIDGE interface. However I am not sure if your ISP will accept that.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.