Problem with 2 bonded interfaces

Home Page Forums Network Management ZeroShell Problem with 2 bonded interfaces

This topic contains 0 replies, has 0 voices, and was last updated by  robix 11 years, 10 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #40732

    robix
    Member

    Hi,
    I’ve setup a router with 4 lan-to-lan vpn connections (VPN00-VPN03), and 2 bonding interface (BOND00 with VPN00+VPN01 and BOND01 with VPN02 and VPN03) and everything seems to work fine, but when I reboot the router I have a problem bringing up the BOND01 interface.
    Here the output of the startup process:

    Start Network…
    Command line is not complete. Try option “help”
    BOND01: unknown interface: No such device
    Master ‘BOND01’: Error: handshake with driver failed. Aborting
    Master ‘BOND01’: Error: handshake with driver failed. Aborting

    Running /root/kerbynet.cgi/scripts/bondstart after startup (in rc.local), the interface goes up without problem.
    Any idea?

    Thanks in advance

    #45754

    imported_fulvio
    Participant

    I have to analize the problem and try to fix it in the next release that will be available next week.
    Your setup appear very interesting. Coud you describe it and send me the url of the document? I will include it in the Zeroshell’s documentation page.

    Regards and thank you for the advice
    Fulvio

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.