Problem flashing navigation Zeroshell 3.0.0

Home Page Forums Network Management ZeroShell Problem flashing navigation Zeroshell 3.0.0

This topic contains 1 reply, has 0 voices, and was last updated by  Yhoni 5 years ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #43899

    Yhoni
    Member

    Hi, I ‘m getting these errors in Zeroshell 3.0.0 installed on usb :

    9:32:55 [ 2837279.987099 ] kjournald starting . Commit interval 5 seconds
    9:32:55 [ 2837279.987130 ] EXT3 -fs ( sda1 ) : mounted filesystem with ordered data mode
    9:32:55 [ 2837280.232085 ] EXT3 -fs ( sda4 ): error : unable to read superblock
    9:32:55 [ 2837280.240454 ] isofs_fill_super : bread failed, dev = sda4 , iso_blknum = 16, block = 32
    9:32:55 [ 2837280.248328 ] UDF -fs : error (device sda4 ) : udf_read_tagged : read failed, block = 256, location = 256
    9:32:55 [ 2837280.249167 ] UDF -fs : error (device sda4 ) : udf_read_tagged : tag = 0x0002 version 0x0000 | | 0x0003 , block 0 !
    9:32:55 [ 2837280.249177 ] UDF -fs : error (device sda4 ) : udf_read_tagged : read failed, block = 512, location = 512
    9:32:55 [ 2837280.249182 ] UDF -fs : error (device sda4 ) : udf_read_tagged : tag = 0x0002 version 0x0000 | | 0x0003 , block 0 !
    9:32:55 [ 2837280.249187 ] UDF -fs : error (device sda4 ) : udf_read_tagged : tag = 0x0002 version 0x0000 | | 0x0003 , block 0 !
    9:32:55 [ 2837280.249191 ] UDF -fs : warning (device sda4 ) : udf_load_vrs : No anchor found
    9:32:55 [ 2837280.249194 ] UDF -fs : blocksize 2048 with Rescanning
    9:32:55 [ 2837280.249222 ] UDF -fs : error (device sda4 ) : udf_read_tagged : read failed, block = 256, location = 256
    9:32:55 [ 2837280.249228 ] UDF -fs : error (device sda4 ) : udf_read_tagged : read failed, block = 512, location = 512
    9:32:55 [ 2837280.249231 ] UDF -fs : warning (device sda4 ) : udf_load_vrs : No anchor found
    9:32:55 [ 2837280.249235 ] UDF -fs : warning (device sda4 ) : udf_fill_super : No partition found ( 1)
    9:32:55 [ 2837280.256332 ] EXT4 -fs ( sda4 ) : unable to read superblock
    9:32:55 [ 2837280.369868 ] EXT4 -fs ( sda5 ) : mounted filesystem with ordered data mode . Opts : (null )

    I run out of internet intermittently and I have to fix that reset the router output operator internet.. Does anyone know how it was feasible to solve ? .

    Zeroshell is installed on a pc 1) AMD Sempron ™ Processor 2800 + 1599MHz and Memory 1031804 kB

    Thank you very much.

    #53236

    DrmCa
    Participant

    Why are you getting UDF errors? I know you said it’s ‘installed’, does that mean installed to HDD or you boot from CD?
    Check your SATA/IDE cables and run disk test to see if your HDD is failing.

    #53237

    Yhoni
    Member

    @drmca wrote:

    Why are you getting UDF errors? I know you said it’s ‘installed’, does that mean installed to HDD or you boot from CD?
    Check your SATA/IDE cables and run disk test to see if your HDD is failing.

    Hi, I Zeroshell installed on a 2GB USB stick. Any suggestions?.

    Thank you for your time.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.