PPPoE over VLAN with Draytek 120?

Home Page Forums Network Management Networking PPPoE over VLAN with Draytek 120?

This topic contains 1 reply, has 0 voices, and was last updated by  DWJames 7 years, 9 months ago.

Viewing 1 post (of 1 total)
  • Author
  • #43161


    is it possible to configure a PPPoE connection so that the modem device does not have to be directly connected to an ETH port on my Zeroshell box?

    I have 4 Draytek Vigor 120+ PPPoE Modems and I thought I can connect these using a dedicated VLAN for each, but although the Zeroshell can ping the modem, it can’t connect with PPPoE over this VLAN interface.

    I get this message in the log:
    11:15:45 pppd 2.4.3 started by root, uid 0
    11:15:45 Using interface ppp3
    11:15:45 Connect: ppp3 < --> /dev/pts/0
    11:16:16 LCP: timeout sending Config-Requests
    11:16:16 Connection terminated.
    11:16:16 Using interface ppp3
    11:16:16 Connect: ppp3 < --> /dev/pts/1
    11:16:21 tcflush failed: Bad file descriptor
    11:16:21 Exit.

    Is there something I’m missing to make this work via a VLAN or do I have to buy some USB Ethernet devices so that the modems are on a physical interface?
    James 🙂

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.