Port forward from same network?

Home Page Forums Network Management ZeroShell Port forward from same network?

This topic contains 0 replies, has 0 voices, and was last updated by  reaperz 4 years, 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #44252

    reaperz
    Member

    Hello

    How to get working port forward from same network?

    Port forward from external network to internal is working fine.

    But if i go from internal network to external address, that should be forwarded, nothing happens.

    Any idea, how to get it working?

    I remember I used to have it working earlier, but somehow not working any more after some update.

    I have “Virtual server” rules:

    from external network to ANY IP – forwarded to internal network server.
    from ANY network external IP – forwarded to internal network server.

    Traffic coming from internal network desktop must fall under that second rule? ANY network and target is my public IP…

    forwarded port 80 (for a start).

    #53769

    gordonf
    Member

    https://www.zeroshell.org/forum/viewtopic.php?t=4923

    In this example you don’t use the virtual server GUI and instead put these rules in the NAT and Virtual Servers script under Cron jobs. I’ve had to do this myself, so I could reach internal servers by their external IPv4 addresses and names.

    Maybe the virtual servers GUI should be changed to make this an option.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.