Poor Performance

Home Page › Forums › Network Management › ZeroShell › Poor Performance

This topic contains 0 replies, has 0 voices, and was last updated by  Kimito Sakata 11 years, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 22, 2007 at 8:12 pm #40609

    Kimito Sakata
    Member

    I’m seeing very slow link on a lan to lan setup. The two lans are connected via a 2Mbps and a 5Mbps Internet link. I used Windows Explorer to copy a 5MB file from one end point to the other and got an average of 28KBps rate based on how long it took to copy. I ran top on zeroshell machine and was 99% idle. What could be the cause of the performance loss? Are there settings (or arguments) that I could play around with?

    April 23, 2007 at 2:45 pm #45309

    imported_fulvio
    Participant

    Try to start zeroshell without support for ACPI.

    Regards
    Fulvio

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.