OpenVPN LAN-to-LAN server Home Page › Forums › Network Management › ZeroShell › OpenVPN LAN-to-LAN server This topic contains 2 replies, has 0 voices, and was last updated by scegg 8 years, 10 months ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts April 5, 2010 at 4:50 am #42328 sceggParticipant HI, How to create a LAN-to-LAN server? If I need to create a LAN-to-LAN with a Server Role, what should be filled in Remote Host blank? Or, should I create a Host-to-Lan at the server side and a LAN-to-LAN at the client side? No documented, no FAQ found. Thanks. April 7, 2010 at 7:15 am #49997 ppaliasMember My guess is that you can leave the remote host blank if the role is “server”. Otherwise if the client’s address is static try to apply it and see if it works. April 7, 2010 at 10:21 am #49998 sceggParticipant Yes. I guessed so but wrong. April 7, 2010 at 11:26 am #49999 ppaliasMember You need to apply the ip address of the client, right? Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.