Openvpn LAN To LAN Bridge Home Page › Forums › Network Management › ZeroShell › Openvpn LAN To LAN Bridge This topic contains 0 replies, has 0 voices, and was last updated by mgibbons 5 years, 11 months ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts February 27, 2013 at 8:41 pm #43589 mgibbonsMember Simple requirement which I thought would be a easy with Zeroshell. Two Sites – Two ADSL Connections One LAN 10.15.0.0/24 Over two sites. Zersoshell At Each Site Bridge Interface At Sita A 10.15.0.251 Bridiging ETH00 And VPN00 Bridge Interface At Site B 10.15.0.249 Bridiging ETH00 And VPN00 VPN Configured And connected – No Additional Parameters. Can Ping each Zeroshell from the other but cannot ping any other hosts at other site in either direction. What am I doing wrong? KR’s Mark February 27, 2013 at 9:15 pm #52679 mgibbonsMember Ok Issue was I was running on ESX and you MIST allow promiscuous mode on the vSwitch otherwise it just wont work. All working now. Mark Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.