OpenVPN Configuration File Home Page › Forums › Network Management › ZeroShell › OpenVPN Configuration File This topic contains 0 replies, has 0 voices, and was last updated by redtdi 10 years, 3 months ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts April 24, 2009 at 2:32 pm #41651 redtdiMember I am using LAN-to-LAN on ZeroShell to create 7 separate tunnels. My client needs to know what encryption I am using and I haven’t been able to find out. Is there an openvpn configuration file that I can look inside to see what the default values are? Thanks, Ken April 24, 2009 at 9:47 pm #48042 imported_fulvioParticipant Zeroshell does not use a configuration file for OpenVPN, but it just configures the VPN with the command line parameters. Use the command ps -ef |grep openvpn to view them. It will appear something like this: openvpn –dev VPN00 –port 1195 –proto tcp-server –secret /tmp/VPN00.psk –dev-type tap –float –ping 1 –ping-restart 7 –management 127.0.0.1 34000 –daemon VPN00_L2L –comp-lzo –down /root/kerbynet.cgi/scripts/vpn_mii Regards Fulvio Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.