network -> zeroshell-router -> 4xDSL Home Page › Forums › Network Management › Networking › network -> zeroshell-router -> 4xDSL This topic contains 0 replies, has 0 voices, and was last updated by john1111 8 years, 10 months ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts April 7, 2010 at 2:21 pm #42332 john1111Member hello, i own an network and 3xDSL plus one 2 MBit/s-line for business. the normal gateway in the network should be the zeroshell-maschine, which should send the traffic across the 4 lines. i have 5 NIC’s, eth00 is the 2MBit/s-line eth01 first dsl eth02 secound dsl eth03 third dsl eth04 is connected to my network how to config that ? what i need to bond together ? do i need to bond something together ? where to say that eth04 shut be the gateway ? April 7, 2010 at 2:55 pm #50042 ppaliasMember First of all read the documentation http://www.zeroshell.net/eng/load-balancing-failover/ and if you still have any questions raise them here. Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.