Network Architecture by Zeroshell

Home Page Forums Network Management Networking Network Architecture by Zeroshell

This topic contains 0 replies, has 0 voices, and was last updated by  petrovski 4 years, 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #44175

    petrovski
    Member

    Hello all, this is my first post and obviously I’m a newb. I’m trying to setup a network similar to the following diagram. Basically I have two static IP’s, one is for the PBX and the one is for the LAN for VPN purposes. I don’t want the PBX to speak with the rest of the network except for softphone access on some desktops/laptops only.

    1.png

    This is my first network setup and any tips, recommendations or advice would be really appreciated 🙂

    #53663

    maccowley
    Member

    I don’t know what PBX system you are using, but maybe you can limit the access on the LAN side to the IP addresses of the soft-phone PCs?

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.