NetBalancing doesn’t work.. it’s a riddle!

Home Page Forums Network Management Firewall, Traffic Shaping and Net Balancer NetBalancing doesn’t work.. it’s a riddle!

This topic contains 1 reply, has 0 voices, and was last updated by  tecnofy 4 years, 8 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #43893

    tecnofy
    Member

    Hi guys,

    I have this situation:

    ETH00: ADSL S – dynamic IP
    ETH01: ADSL A – dynamic IP

    ETH03: private LAN – 10.0.0.0/8

    http://i.imgur.com/fiNHxKY.png

    This is the routing table, with autoconfigured route from dyn.ip: http://i.imgur.com/O16PKVc.png

    I would balance the traffic from ETH03 to internet, so, I’ve activated NetBalancer:
    http://i.imgur.com/gBNvAMQ.png

    What happens is that just one of the two gateway works, in particurlar the last one which has obtained dynamic ip.

    eg: if the working one is ADSL A, and I click “dyn,ip” on ETH00, the working one become ADSL S!

    This happens with ZeroShell 3.0.0, but even with 2.0.

    What’s going on?

    Thank you!

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.