Netbalancer fault with dynamic ip (cable modem)

Home Page Forums Network Management ZeroShell Netbalancer fault with dynamic ip (cable modem)

This topic contains 2 replies, has 0 voices, and was last updated by  FlashEngineer 5 years, 11 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #43261

    I don’t understand what is the problem with this net balancer thing.

    I have 1 connection, ETH1 it’s dyanmic ip cable modem, when i put it in netbalancer it fails… becasue it can’t ping the ip I set….

    I am really really frustrated, can someone help, my cable modem is behind a default GW but I can’t set that anywhere….



    Same problem here – anyone came up with a solution? I can’t seem to get it working :/



    Why would you want net balancer with 1 connection?



    Obviously not what this thread is about.

    The problem is, that when you have n number of WAN-interfaces running DHCP, one cannot assign the WAN-interfaces to the loadbalancer. It simply won’t work (my simply says ‘Failed’ on each one, even though each network interface has gotten an adress via DHCP).

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.