Net Balancer ping time out

Home Page › Forums › Network Management › ZeroShell › Net Balancer ping time out

This topic contains 0 replies, has 0 voices, and was last updated by  fadjar340 10 years, 6 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 9, 2008 at 5:28 pm #41351

    fadjar340
    Member

    Dear All,

    I already setup net balancer and works great!!!
    But I have some weird condition, I can ping the internet without a hitch.
    Since I left the network without any packets for certain time, around 5 minutes, then I can not ping internet target, RTO.
    Then I plug off one of the interface, then ping works again.

    Is there any explanation concerning this condition?

    Regards,
    Fadjar340

    December 10, 2008 at 5:48 am #47260

    fadjar340
    Member

    After several experiment, I found that the time out occurred because of ARP not propagate fast enough to client.
    I tried not to unplug the wire and I should wait several minutes, around 0.5-1 minutes to get back the ping and ARP entries.

    So, I think this is not a big problem….

    Thanks to Fulvio who create the excellence application.

    Regards,
    Fadjar340

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.