Need help Captiveportal with brige&vlan Home Page › Forums › Network Management › ZeroShell › Need help Captiveportal with brige&vlan This topic contains 4 replies, has 0 voices, and was last updated by tkp1969 10 years, 5 months ago. Viewing 6 posts - 1 through 6 (of 6 total) Author Posts January 24, 2009 at 3:03 pm #41421 tkp1969Member howto configure captiveportal authentication brige&vlan in my network use ! ! ! ! ! ! Internet —! L2 trunk ! ! ZeroShell ! ! Client ! ! ! BR ! ! ! ! Please help me. regard. January 24, 2009 at 3:14 pm #47474 imported_fulvioParticipant You should provide further details. Regards Fulvio January 25, 2009 at 8:55 am #47475 calmanMember Is an “eduroam” scenario? January 25, 2009 at 9:04 am #47476 imported_fulvioParticipant Eduroam specifies the authentication based on proxy RADIUS servers, but he should better describe the topology of the network where he want to add the captive portal. Regards Fulvio January 27, 2009 at 8:27 am #47477 tkp1969Member my detail of network, please help me. January 28, 2009 at 8:47 pm #47478 imported_fulvioParticipant I think the captive portal cannot work correctly in your setup. This is because, at the moment, the captive portal is able to protect just one interface/VLAN. Regards Fulvio Author Posts Viewing 6 posts - 1 through 6 (of 6 total) You must be logged in to reply to this topic.