nDPI for Deep Packet Inspection

Home Page Forums Network Management ZeroShell nDPI for Deep Packet Inspection

This topic contains 3 replies, has 3 voices, and was last updated by  imported_fulvio 11 months, 3 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #44565

    imported_fulvio
    Participant

    Hi,

    a newer Kernel is available with nDPI support that allows to use Deep Packet Inspection in the Firewall and in the Traffic Shaping. nDPI, compared with the L7 filters is an active project, continuously updated and detects much more protocols. For greater details, please visit the page
    https://www.zeroshell.org/ndpi-iptables

    Regards
    Fulvio

    #54161

    pidda
    Member

    Hi,

    neither 49600 nor 49700 can be downloaded.

    17:45:01 INSTALL: 49600: ERROR: Downloading process has failed
    17:57:03 INSTALL: 49700: ERROR: Downloading process has failed
    17:57:03 INSTALL: 49700: Installer cleanup process executed

    Please give some advice.
    Thanks in advance

    Peter B├╝ttner

    #54162

    pidda
    Member

    ethtool -K ETHXY rx off tx off did the job.

    Regards
    Pidda

    #54163

    easpem
    Member

    After upgrading form 3.6.0 to 3.8.1 none of the ndpi firewall rules work as they use to. I tried deleting those rules and made them again, still no work.

    Any suggestions?

    Thanks in advanced.

    Edit
    After deleting all rules and restarting the router and making every rule again everything ist working fine.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.