NAT ETH2 Home Page › Forums › Network Management › Networking › NAT ETH2 This topic contains 1 reply, has 0 voices, and was last updated by micampo 9 years, 5 months ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts August 11, 2010 at 1:03 pm #42576 micampoMember NAT eth2 currently has three (3) network cards in my server ZS eth0-LAN, eth1-WAN1, eth2-WAN2, at the option “ROUTER – NAT – ENABLE NAT INTERFACES” added eth1 and eth2, you must perform some additional configuration to operate the navigation for eth2? Thanks August 12, 2010 at 5:39 pm #50891 ppaliasMember You have to add the interfaces on Netbalancer as well in order to use both WAN lines. August 13, 2010 at 6:33 pm #50892 micampoMember ok, now add the eth2 in netbalancer (gateway / mask) and put their respective weight so far is working well! Thanks for your help. 😉 Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.