NAT and virtual servers

Home Page Forums Network Management Networking NAT and virtual servers

This topic contains 0 replies, has 0 voices, and was last updated by  matth 5 years, 7 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #43625

    matth
    Member

    I know I’m doing something wrong, but I’m not sure what.

    I’ve got a very simple setup. ETH00 is my WAN with NAT enabled. It’s a DHCP cable modem.

    My internal LAN is on ETH003, NAT not enabled.

    I have virtual servers pointing to servers on my internal LAN e.g. “ANY/ETH00 port 80 192.168.1.10:80”

    This works great when I’m going from the outside in, but if I request the WAN from the LAN on port 80, it doesn’t work.

    What am I doing wrong?

    Thanks in advance.

    #52719

    matth
    Member

    I understand this is referred to as ‘NAT reflection’ by pfsense and m0n0wall. Has anyone figured out how to implement this in Zeroshell with a dynamically assigned WAN. I saw the examples of statically assigning it, but that won’t work for us DHCP folks.

    Thanks.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.