Multiple SSIDs in Orange Pi Zero (ZeroShell 3.8.2a)

Forums Network Management ZeroShell Multiple SSIDs in Orange Pi Zero (ZeroShell 3.8.2a)

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #66539
    Max Jožef Zravnić
    Participant

    Hi everyone,

    I try it one more time – my first post was somehow marked as spam, don’t understand why.
    So I finally installed ZS 3.8.2a on my OPi Zero and really enjoyed playing around with it today.

    The onboard Wifi Interface works without any problems, I can use it in client as well as in AP mode.
    BUT as soon as I try to add more than one SSID to it, the second one won’t come up.

    Simple Setup to show the problem – I just try to add two SSIDs in AP mode and restart the wifi interface – see what happens:

    
    REGULATORY DOMAIN: AT (AUSTRIA)
    
    [phy1]  Unknown Model
    -- If --- Mode -- SSID -------------------------- Hide -- WDS -- Security -
    >> WLAN00  AP     wifree_test                       no     no     WPA-PSK
       WLAN01  AP     test                              no     no     WPA-PSK
    
    COMMANDS
      <N> New SSID                         <M> Modify SSID
      <D> Delete SSID                      <I> Show Information
      <C> Reg-Domain/Std/Channel/Tx-Power
      <L> List Stations                    <S> Channel Scanning
      <R> Restarting Devices               <Q> Quit
    
    >> r
    
    WARNING: if you continue with this operation the WiFi subsystem will
    be stopped and restarted.
    All WiFi connections will be terminated.
    
    Are you sure you want to continue (y/n)?y
    
    Starting WiFi subsystem ...
    Creating virtual WiFi interfaces:
    WLAN00(phy1) (Mode:ap  Sec:wpa-psk  SSID:wifree_test Status:up)
    nl80211: Could not re-add multicast membership for vendor events: -2 (No such file or directory)
    Using interface WLAN00 with hwaddr 90:53:26:15:db:92 and ssid "wifree_test"
    WLAN00: RADIUS Accounting server 127.0.0.1:1813
    WLAN00: interface state UNINITIALIZED->ENABLED
    WLAN00: AP-ENABLED
    WLAN00: 10.0.1.1/255.255.255.0
    WLAN01(phy1) (Mode:ap  Sec:wpa-psk  SSID:test Status:up)
    nl80211: Could not configure driver mode
    nl80211: deinit ifname=WLAN01 disabled_11b_rates=0
    nl80211 driver initialization failed.
    WLAN01: interface state UNINITIALIZED->DISABLED
    WLAN01: AP-DISABLED
    hostapd_free_hapd_data: Interface WLAN01 wasn't started
    WLAN01: 10.0.2.1/255.255.255.0
    

    So the first SSID comes up without any problems, for the second one the driver doesn’t initialize.
    As soon as I delete the first SSID, the second one comes up without any problems.

    Does anyone have any hints for me?

    Thanks and regards,
    Max

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.