Multiple 3G modems

Home Page Forums Network Management ZeroShell Multiple 3G modems

This topic contains 2 replies, has 0 voices, and was last updated by  semoca 6 years, 10 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #42909

    semoca
    Member

    Hi Guys,

    I’m trying to get Zeroshell to work with two USB 3G modems as WAN connecitons in order to use Net Balancer later on but I’m having some difficulties.
    Hardware:
    Alix board 2D3
    3G modems: Huawei K4505 & K3765

    So far, have been able to connect any of them separately with no problems.
    but as soon as I try to connect both, the second one, no matter which one it is, it will just fail.
    I’ve got them switched to modem mode with no problems. but for some reason, it’s not setting up the second one properly.
    I’ve just got ttyUSB0-3. The first modem is connected to ttyUSB0 but cannot use any of the rest for the second one.

    Can anyone please help me out with this one?

    thanks

    #51653

    semoca
    Member

    Up

    #51654

    yueng
    Member

    @semoca wrote:

    Up

    Hi

    I am trying to do the same. Were you able to do it ?. Are ther any other options I can use to do this?.

    #51655

    bungjoe
    Member

    is everyone has the solution yet? i kinda stump on the same problem here. i’m trying to use huawei ec1261 and bandluxe c170 together but only one of them are detected on the GUI and the representative ttyUSB only created for the first modem.

    is there any solution for this?

    sorry to revive a dead thread back alive again 😕

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.