Modify the kerbynet.cgi script

Home Page › Forums › Network Management › ZeroShell › Modify the kerbynet.cgi script

This topic contains 1 reply, has 0 voices, and was last updated by  fadjar340 10 years, 10 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 2, 2008 at 6:30 pm #40977

    fadjar340
    Member

    First of all thank you for your great job to create the wonderful distro.

    I just wondering if it possible to me to modify the mkbonddev in the folder /root/kerbynet.cgi/scripts permanently, because I need some features from bonding to fulfill my tasks. I need to use arp_interval, arp_ip_target and use_carrier=1. I don’t need to put the option into the web admin, just in the bond device creating script.

    TIA

    Regards,
    Fadjar340

    April 3, 2008 at 9:45 pm #46339

    imported_fulvio
    Participant

    You should copy the modified file in /Database directory and then use the /etc/rc.local startup script to move it in the /root/kerbynet.cgi/scripts directory. A better solution is to use the startup script /etc/rc.pre.

    Regards
    Fulvio

    April 4, 2008 at 7:16 am #46340

    fadjar340
    Member

    Dear Fulvio,

    Thank you for your hints.
    Now, I got my own image to the USB stick with bonding options as I want.

    Go open source…

    Regards,
    Fadjar340

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.